Color Temp. Adjust On
Selected characters
Contrast
Narrows the gap between
brightness and darkness.
Broadens the gap between
brightness and darkness.
Setup hint
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding SELECT
button at [+31]. The color for [+32] to [+40] numbers will change from
white to magenta. This special mode is better for dark scenes.
For brighter scene some parts of the picture might not be clear. We
recommend to set at [+31].
"Panel Life" in the Function Menu should be set to Normal when
Contrast setting is adjusted.
Brightness
Black is subdued for
increased overall darkness.
Black is set off for increased
overall brightness.
Adjust to preference.
Picture Enhancement
Sets the clarity of small details to the desired level.
Color Temperature
Normally set to Normal.
Color Temp. Adjustment
Amplitude
Cut Off
Reset
Turn On when you wish to change color temperature is required to
adjust depending on the user’s preference.
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
Color
Decrease color intensity. Increase color intensity. Adjust to preference.
Tint
Enhances red and weakens
green.
Enhances green and weak-
ens red.
This is not available to adjust when receiving PAL/SECAM signal.
In this case the character will be grayed out.
Adjust for most realistic skin color.
Brighter scene is decreased
in reddish color.
Brighter scene is increased
in reddish color.
Brighter scene is decreased
in greenish color.
Brighter scene is increased
in greenish color.
Brighter scene is decreased
in bluish color.
Brighter scene is increased
in bluish color.
Dark scene is decreased in
reddish color.
Dark scene is increased in
reddish color.
Dark scene is decreased in
greenish color.
Dark scene is increased in
greenish color.
Dark scene is decreased in
bluish color.
(off the function)
Dark scene is increased in
bluish color.
(waiting to reset)
Red
Green
Blue
Red
Green
Blue
Adjust color temperature depending on the user’s preference. These
settings are independently stored in each of the 4 Color Temperature
modes.
OPERATING INSTRUCTIONS (continued)
PICTURE MENU (RGB mode)
