A SERVICE OF

logo

Open as PDF
next previous
Figure 3-47 HP Integrity Superdome/sx2000 EFI Boot Manager
Use the up and down arrow keys on the keyboard to highlight EFI Shell (Built-in) and
press Enter. Do this for all partitions.
After you start the EFI Shell, the console window displays the EFI shell prompt (Figure 3-48).
Figure 3-48 EFI Shell Prompt
NOTE: If autoboot is enabled for an nPartition, you must interrupt it to stop the boot process
at the EFI firmware console.
The VFP indicates that each partition is at system firmware console (Figure 3-49).
Booting and Verifying the System 105