Chapter 4—Load paper or transparency film, or load originals 11
HP PSC 700 Series
/RDGWKHLQSXWWUD\ZLWKHQYHORSHVRQO\ZRUNVZLWKSULQWLQJ
Your HP PSC provides two methods for working with envelopes. Do not use shiny or
embossed envelopes or envelopes that have clasps or windows.
• If you are printing one envelope, use the envelope slot. Slide the envelope into the
envelope slot, which is located on the right side toward the back of the output tray.
The envelope should be inserted with the flap up and the flap positioned on the left,
as shown in the illustration. Insert the leading edge of the envelope on the top of the
output tray until it stops.
• If you are printing multiple envelopes, remove all paper from the input tray, and
then slide a stack of envelopes into the tray, with the envelope flaps up and to the
left (print-side down), until they stop.
