– Technical specification tables 53
Overhead tranparencies
The table below summarizes the overhead tranparency specifications
that provide the best performance.
Note The specifications listed in this section generally apply to all HP
LaserJet printers but check the user documentation that came with your
printer for product specific information.
Property Specifications
Caliper 0.12 mm to 0.13 mm (4.8 mils to 5.2 mils) for HP Color LaserJet
printers.
0.10 mm to 0.11 mm (4.0 mils to 4.4 mils) for HP black and white
printers.
Electrical surface resistivity 2.0 to 15 by 10
10
ohms/square.
Fusing compatibility Overhead transparency materials must be compatible with the
heat and pressure of the fusing process. Materials must not
discolor, melt, offset, or release undesirable emissions when
heated to 205° C (401° F) for 0.1 second (0.4 second for
HP Color LaserJet printers).
