A SERVICE OF

logo

Open as PDF
next previous
F-4
MAC Address Management
MAC Addresses (for Spanning Tree Operation)
MAC Address Management
MAC Addresses (for Spanning Tree
Operation)
When no VLANs are configured, STP uses the MAC address assigned to the
switch. (This is the MAC address printed on the label on the front of the
switch.) When VLANs are configured, STP must be configured separately for
each VLAN. In this case, the MAC address assigned to each instance of STP is
the MAC address assigned to the corresponding VLAN. These addresses
appear in the Spanning Tree Information screen . Refer to the “Switch
(Default) MAC Address” on page F-2, or “VLAN MAC Addresses” on page F-3.)
SEDONA.BK : sed_apf.fm5 Page 4 Thursday, February 27, 1997 10:11 AM