35
5 Logging In and Using the HP
TopTools Remote Control Web
Interface
After you’ve installed, cabled, and configured the HP TopTools Remote Control
card using the card’s BIOS setup program, you are ready to set options for the
Remote Control card using HP TopTools Remote Control’s management
software.
Using your web browser you can remotely set all card options including:
• Setting up an administrator list (up to 16) for system access and
notification
• Configuring event management operations, including the enabling of
paging and e-mail notification
• Configuring serial communications for external modem
• Configuring LAN access
CAUTION Configuring LAN access during a remote connection is
dangerous. Changing your LAN access settings while logged
on could terminate your connection.
• Viewing a log of server events and PCI utilization
• Viewing current measurement sensors
• Viewing server screens
• Running diagnostics on the server
• Performing remote firmware or BIOS updates
• Remotely power on, power off, power cycle, or reset the server
