A SERVICE OF

logo

13
Initial Settings
When the camera is powered up for the first time, please set the display language and date & time.
Setting the Language
Press directional buttons to move through the selection.1.
Highlight the desired a language, and then press 2. OK button
.
Setting the Date & Time
Press left and right direction buttons to move through the selection.1.
Press the up and down buttons to change the value for the date and time.2.
Press 3. OK button
when finished. This will save your date and time settings.
If necessary, press 4. Menu button
to close the menu.
At this point, the camera settings are set to the default automatic mode and is ready to take photos and videos.
If the camera is without battery power for more than 48 hours, the initial settings
may reset and require another setup.
Modes Selector Switch
This camera has a three mode selector switch. The different modes are:
Photo Mode
Slide the mode switch to [ ] take photos and record audio clips by selecting Voice REC from scene modes
(see pages 12 for additional details).
Video Mode
Slide the mode switch to [ ] record videos (see page 29 for additional details).
Playback Mode
Slide the mode switch to [ ] view and edit captured images or playback videos and audio clips.
The recording of voice memo attached to images is also available in this mode.