Zonesets containing domain/port number zones while in Open Fabric interop mode no longer
cause zoning to han
g
When directors an
d edge switches in a fabric were configured for Open Fabric 1 .0
interop mode, and
the fabric’s zoneset contained a zone with members defined by
domain/port number instead of World Wide N ame, activating changes to the zoneset
could cause the Zone Manager to hang. When this occurred, the Zone Manager could
hang indefinitely, preventing any further zone activities from a ny management location.
It should be noted that domain/port number zones are not suppor ted in Open Fabric
1.0 interop mo
de, and are ignored. The Zone Manager will no longer hang under these
conditions, and these zones are still ignored in O pen Fabric 1.0 interop mode.
Occasional Ethernet hang issue is resolved
Under certain conditions, the Ethernet communications could intermittently hang on
director 2/140, edge switch 2/24, and edge switch 2/12. This issue has been
corrected.
Features no
t supported in this release
The followi
ng director and edge switch feature is not suppor ted in this release:
• SANtegrity Authentication
The following HAFM features are not supported in this release:
• SANtegrity Security Center
• Group Con
figuration Manager
These fea
tures are described in the documentation released with firmware 07.00.00 and
HAFM 08.06.00. Some of these features may be available in a future release.
Documentation released with firmware 07.00.00 and HAFM 08.06.00
To support these products, we are providing documentation from both McDATA
Corporation (the product developer) and from HP (the product OEM) . The HP documents
include all information HP has incorporated into the products to date. The McDATA
documents include only the basic product information.
6
