B Control panel menus 207
Configure device menu
CARTRIDGE LOW=
CONTINUE
CONTINUE
STOP
Determine how the product functions when toner is low. The CARTRIDGE
LOW message first appears when the print cartridge is almost out of toner.
(About 2,400 pages can still be printed at five percent coverage.)
CONTINUE: The product continues to print while the CARTRIDGE LOW
message is displayed.
STOP: The product goes offline and wait for further action.
For more information, see “Managing the print cartridge” on page 90
.
JAM RECOVERY=
AUTO
AUTO
ON
OFF
Determine how the product functions when a jam occurs.
AUTO: The product automatically selects the best mode for product jam
recovery (usually ON). This is the default setting.
ON: The product automatically reprints pages after a jam is cleared.
OFF: The product does not reprint pages following a jam. Printing
performance might be increased with this setting.
RAM DISK=AUTO AUTO
OFF
This item determines how the RAM disk is configured. This item appears
only if there is no optional hard disk installed, and the product has at least
8 megabytes (MB) of memory.
OFF: The RAM disk is disabled.
Note
If the setting is changed from OFF to AUTO, the product automatically
reinitializes when it becomes idle.
LANGUAGE=ENGLISH Includes all languages in the list.
When scrolling through the language values, LANGUAGE= should be
updated so it is presented in the highlighted language.
Item Values Explanation
