User’s Guide 15
English
Front Panel Indication (OKIPAGE 8p)
As well as error indication on the host PC, the OKIPAGE 8p has
a set of LEDs that inform the user of certain conditions.
Each of the LEDs can be in any one of five states:
R ON
l OFF
© Blinking (slow) repeats – ON(2secs)/OFF(2secs)
« Blinking repeats – ON(500ms)/OFF(500ms)
Blinking (fast) repeats – ON(120ms)/OFF(120ms)
The front panel switch has different functions, depending on
the condition of the front panel LEDs and also on the length of
time that the button is pressed. There are three different modes
of operation:
button pressed and released immediately.
button pressed for more than 2 seconds (but less than 5 seconds).
button pressed for more than 5 seconds.
State Comments
Ready
llR—
Cancelling data process
ll©
Buffer contents –
cleared
(data remains in the buffer)
printed
Recieving, processing or
ll«
—
printing data
Manual request
l«l
—
Change drum, toner low
©
––—
or toner sensor warning
Buffer overflow or Print
«ll
Recover –
overrun (ERROR)
Paper out or Input
«ll
Recover and print re–start –
jam (ERROR)
Paper jam (size check,
«ll
print re-start by cover open/close
feed jam, exit jam)
Error Cover open
«ll
—
Program error (watchdog
«««
Recover by power off/on
timer or controller error)
Hardware error
Service call if no recovery made after
(FATAL ERROR) power off/on
Reseting printer
ll«
—
Initializing
RðlRðlRðl
—
EEPROM initializing
«ðl«ðl«ðR
—
Error
Manual feed
Ready
LED Indication
8pwugb.p65 03/09/98, 13:2715
