6-4 Configuring and Controlling the Printer
Printer Status
This is the printer’s current state, such as Ready or Printing.
Software
This is the version number of the printer’s embedded software.
ColorMark CMS
◆ Version — the version of ColorMark Color Management Sys-
tem (CMS) software currently installed for this printer.
◆ Ink Type — not detected in software, always ColorMark
Gator Solvent Ink.
Approximate Ink Remaining
This shows the volume (in milliliters) of ink remaining in each
reservoir, and whether the corresponding profilers are installed.
The profilers enable the print server to precisely track ink and
cleaning solvent usage.
See “Checking Jet Health” on page 3-6 for instructions on how
to properly refill ink and cleaning solvent.
Note Replace the profiler when you refill the ink or clean-
ing solvent. Failure to replace the profiler will disable
ink counting and eventually cause an “out of ink”
error, regardless of how much ink is in the reservoir.
