Control panel
message
Description Recommended action
Event Log Empty SHOW EVENT LOG was selected from
the control panel, and the event log is
empty.
No action necessary.
Genuine HP
supplies installed
A new HP cartridge has been installed.
The printer returns to the Ready state after
approximately 10 seconds.
No action necessary.
GENUINE HP
SUPPLIES
DESIGNED FOR
<PROD>
This genuine HP supply was not designed
for this printer and is not supported. Print
quality might be affected.
Replace this supply with a genuine HP
supply designed for this printer.
Incorrect Access to the menu is restricted. Contact the network administrator.
INCORRECT
<COLOR>
CARTRIDGE
alternates with
For help press ?
A color cartridge is installed in an incorrect
slot or the cartridge is the wrong type, and
the cover is closed.
Press ? for help.
or
See Changing print cartridges for more
information.
INCORRECT
SUPPLIES
For status press the
Select button on the
printer front panel.
At least one supply item is incorrectly
positioned in the printer and another
supply item is missing, incorrectly placed,
out, or low.
Press the Select button on the printer front
panel and then press ? for help.
Initializing This message is displayed when the
printer is turned on, as soon as the
individual tasks begin initialization.
No action necessary.
Initializing
permanent storage
This message is displayed when the
printer is turned on to show that
permanent storage is being made ready
for use.
No action necessary.
INSTALL <COLOR>
CARTRIDGE
alternates with
For help press ?
The cartridge is either not installed or not
correctly installed in the printer.
Press ? for help.
or
See Changing print cartridges for more
information.
INSTALL FUSER
For help press ?
The fuser is either not installed or not
correctly installed in the printer.
Press ? for help.
or
See Replacing the fuser and pickup roller
for more information.
INSTALL SUPPLIES
For status press the
Select button on the
printer front panel.
At least one supply item is missing or is
not correctly seated in the printer and
another supply item is missing, incorrectly
placed, out, or low. Insert the supply item
or make sure the installed supply item is
fully seated.
Press the Select button on the printer front
panel and then press ? for help.
INSTALL
TRANSFER
UNIT
alternates with
For help press ?
The transfer unit is either not installed or
not correctly installed in the printer.
Press ? for help.
or
See Replacing the transfer kit for more
information.
Software Technical Reference ENWW Technology background information 31
