A SERVICE OF

logo

Settings, Telnet Config parameter ).
HP Web Jetadmin password
Configured on the print server using HP Web Jetadmin
and an HP-proprietary SNMP MIB (Management
Information Base) object. For instructions, refer to your
online help for HP Web Jetadmin.
Examples of Access Control Settings
Settings Level of Access
Control
Embedded web
server ,
SNMP v1/v2c, or
Telnet enabled
Administrative
password not set
SNMP Set
Community
Name not
specified
Host access list
empty
None.
Any system can access
the print server
configuration parameters
through the embedded
web server,
SNMP v1/v2c, or
Telnet. No passwords
are required.
Best used for a trusted
environment.
Password(s) set:
IP administrative
password,
HP Web Jetadmin
password,
SNMP Set
Community
Name
No encryption
Host access list
empty
Low.
Any system can access
the print server
configuration parameters
through the embedded
web server,
SNMP v1/v2c, or
Telnet, but password(s)
protect against
unintentional
configuration changes.
Best used for a trusted
environment.