A SERVICE OF

logo

25
Continue to slide the wheel axle through the extended
hex bushing, wheel, extended hex bushing and then
the shock.
Fit a .437 (large diameter) cap nut on the end of the
wheel axle.
Support the opposite end of the wheel axle and tap the
cap nut with a hammer to secure it on the end of the
wheel axle.
Pull on the .437 cap nut to make sure the front wheel
assembly is secure.
Shock
.437 (Large
Diameter)
Cap Nut
Wheel
Axle
.437"
.437 Cap Nut
53
Completely tighten the four screws in the front handlebar
assembly to secure the handlebars.
Tighten
Screws
Tighten
Screws
54
Assembly