8
AMCAP Configuration Toolbar
Using the toolbar at the top of the AMCAP window, you can access the property settings of the
AMCAP software. Below is a list of properties which can be configured:
Select this option to open the “
Capture File” dialog box and set the
file name of the captured video file.
At the “Set Capture File” dialog box,
select a location to save the captured
video file, then specify a file name
(NOTE: please include the AVI file
extension at the end of the file name;
for example, “myvideo.avi”), and then
click “Open”.
After you set the capture file, you can
select this option to open the “Set File
Size” dialog box and change the
amount of reserved disk space for the
captured video file.
At the “Set File Size” dialog box, the
“Free disk space” shows the total
available disk space on your local
drive. Input the amount of disk space
(in MB) to reserve for the captured
video file, and then click “OK”.
NOTE: This option is only to reserve a
specified amount of free disk space for
the captured video file, and it does not
limit the file size of the captured video
file.
As…
Select this option to open the “
Capture File” dialog box and save the
captured video file as a new file.
At the “Set Capture File” dialog box,
select a location to save the captured
video file, then specify a new file name
(NOTE: please include the AVI file
extension at the end of the file name;
for example, “myvideo2.avi”), and
then click “Open”.
Select this option to exit the AMCAP
software.
Device Name
(depending on your
system
configuration)
This section lists all connected
video/audio capture device(s) on your
computer (NOTE: Please note that you
must select a video capture device and
an audio capture device before you
can use your Webcam with AMCAP).
If you have multiple video/audio
devices and want to change the
device(s) for video/audio capturing with
AMCAP, select to check the device(s)
on the list.
