A SERVICE OF

logo

4
Installation:
NOTE: The pictures shown in the User’s Manual are for demonstration purposes only. Your computer or product may look slightly different.
1. Turn off your computer.
2. Plug your Mouse into an available PS/2 Mouse Port on your computer.
TIP: For most computers, the PS/2 Mouse Port is located on the top of the back panel. If you are not able to find the PS/2 Mouse Port on
your computer, please refer to your motherboard’s user’s manual.
3. Turn on your computer.
4. Your computer will detect your Mouse, and the necessary drivers will be installed automatically.
5. Your Mouse is now ready to be used.