A SERVICE OF

logo

4
Hardware Installation:
1. Connect The Wireless USB Receiver To Your Computer:
a. Turn on your computer.
b. Connect the Wireless USB Receiver into an available USB port of your computer.
c. After Windows
®
has loaded, it will detect your USB device and the necessary drivers will be installed automatically.
2. Battery Installation:
a. Remove the Battery Compartment Cover from the bottom of your Mouse.
b. Install the two enclosed AA Ni-MH Rechargeable Batteries into the Battery Compartment following the battery orientation
guide printed inside the compartment.
c. Replace the Battery Compartment Cover back onto your Mouse until it securely locks.