4
Consumer Support Troubleshooting Tips
Operating Instructions Safety InstructionsInstallation Instructions
About the controls on the air conditioner.
Features and appearance will vary.
MODE CONTROLTEMP CONTROL
Temp Control
The temp control is used to maintain the
room temperature. The compressor will
cycle on and off to keep the room at the
same level of comfort. Turn the knob
clockwise to
Cooler
(blue) and the indoor
air will become cooler. Turn the knob
counterclockwise to
Warmer
(red) and
the indoor air will become warmer.
Mode Control
Hi Cool
and
Low Cool
provide cooling with
different fan speeds.
Hi Heat
and
Low Heat
provide heating with
different fan speeds.
Fan Only
setting provides air circulation and
filtering without cooling or heating.
NOTE: If you move the mode control from a
cool setting to Off, a fan setting or a heat
setting, wait at least 3 minutes before switching
back to a cool setting.
Cooling Descriptions
For Normal Cooling
—Select
Hi Cool
or
Low Cool
with the temp control at midpoint.
For Maximum Cooling
—Select
Hi Cool
with
the temp control turned clockwise as far as
possible.
For Quieter & Nighttime Cooling
—Select
Low Cool
with the temp control at midpoint.
Heating Descriptions
For Normal Heating
—Select
Hi Heat
or
Low Heat
with the temp control at midpoint.
For Maximum Heating
—Select
Hi Heat
with
the temp control turned counterclockwise as
far as possible.
For Quieter & Nighttime Heating
—Select
Low Heat
with the temp control at midpoint.
Circulaire
For continuous
side-to-side air
circulation, set
the Circulaire
switch to
On
.
For fixed side-to-side air direction, set the
Circulaire switch to
On
until the desired air
direction is obtained, then move it to
Off
.
Controls
