General Operation 25
2.2.3 Switching Between Settings
The FP35 analyzer lets you save up to three different sets of default settings.
You may want to set up your analyzer in different ways for testing analog hear-
ing aids versus digital hearing aids. Or you may have multiple users, each with
his own default settings preferences. See Section 2.3.1 for details on saving
default settings setups.
[F1] in the Opening Screen is normally used for switching between different set-
ups. Push [F1] to switch between SETTING 1, SETTING 2, or SETTING 3. See
Section 2.3.2 for more information on how the [F1] key can be used.
2.3 The Default Settings Menu
The Default Settings menu contains all the choices that you can adjust and
save as defaults. See Figure 2.3. This gives you the ability to program your
FP35 hearing aid analyzer so that when you turn it on, your favorite settings
are already selected. A default setting can always be overwritten by making an
adjustment in a local menu.
Just like the local menus, the Default Settings menu is divided into three parts—
the main menu, an advanced menu, and a resets menu. The main menu con-
tains basic settings that users will most likely want to adjust to fit their needs.
The advanced menu contains settings that advanced users may care to adjust.
The resets menu contains the default amplitudes and delay times for source sig-
nals.
Figure 2.3—Default Settings
