A SERVICE OF

logo

Open as PDF
next previous
2-3TPS150 Switching and Transmission System • Installation
3. Insert the transmitter into the rack, aligning the holes in the mounting bracket
with those of the rack.
4. Secure the transmitter to the rack using the supplied machine screws.
Projector mounting the receiver
If desired, projector mount the receiver as follows:
1. Remove the rubber feet from the bottom of the receiver.
2. Attach the supplied 992547-2 projector pole mounting bracket to the receiver
with the four provided #8 machine screws.
3. Place a locally-obtained U-bolt around the projector pole and through the
slotted holes in the bracket (figure 2-2). Secure the bracket in place with
locally-obtained bolts.
CABLE EQUALIZATION
- ADJUST + SELECT
LOW FREQ.
HIGH FREQ.
POWER
TPR150
Twisted Pair Video Receiver
Projector Mounting
Bracket
Figure 2-2 — Projector mounting the receiver