SW4 3G HD-SDI • Installation and Operation
Installation and Operation, cont’d
2-8
AUTO
SWITCH
ACTIVE
SW4 3G HD-SDI
MULTI-RAT E SDI SWITCHER
1
MODE
2
NORMAL
3
AUTO
4
RATE
NOT
RECOGNIZED
270 Mbps
1.485 Gbps
2.97 Gbps
Turning on auto-input switch mode
The Auto Switch Active LED lights, indicating that
auto-input switching is enabled.
To select normal mode (turn auto-input switch mode off),
1. Press and hold the Mode (Input 1) button.
2. While holding down the Mode button, press and hold the
Normal (Input 2) button.
3. Release the Mode and Normal buttons simultaneously.
AUTO
SWITCH
ACTIVE
SW4 3G HD-SDI
MULTI-RATE SDI SWITCHER
1
MODE
2
NORMAL
3
AUTO
4
RATE
NOT
RECOGNIZED
270 Mbps
1.485 Gbps
2.97 Gbps
Turning off auto-input switch mode
The Auto Switch Active LED turns off, and the switcher
switches to the previously selected input.
N
If power is disconnected from the switcher, the unit retains
mode and input settings.
