VersaTools
®
MDA 3 Series • Installation
VersaTools
®
MDA 3 Series • Installation
VersaTools
®
MDA 3 Series, cont’d
(2) 4-40 x 3/16" Screws
Use 2 mounting holes on
opposite corners.
VersaTools Rack Shelf
1/4 Rack Width False Front
Face Plate
D
IS
T
R
IBU
T
IO
N
A
M
P
L
IF
IE
R
D
IS
TR
IB
U
T
IO
N
A
M
P
L
IF
IE
R
D
IS
T
R
IBU
T
IO
N
A
M
P
L
IF
IE
R
Figure 1 — Rack mounting the MDAs on a
VersaTools rack shelf
D
I
S
T
R
I
B
U
T
I
O
N
A
M
P
L
I
F
I
E
R
D
I
S
T
R
I
B
U
T
I
O
N
A
M
P
L
I
F
I
E
R
D
IS
T
R
IB
U
T
I
O
N
A
M
P
L
I
F
I
E
R
M
D
A
S
E
R
I
E
S
D
I
S
T
R
IB
U
T
IO
N
A
M
P
L
I
F
I
E
R
Figure 2 — MDAs mounted on a standard rack
shelf
Installation
The MDA 3 Series mini distribution amplifiers (DAs) can be
mounted on a rack shelf, to a rack without a shelf, under a desk
or tabletop, or on a projector bracket.
Rack mounting
For optional rack mounting, mount the MDA on any of the
following rack shelves:
• RSF 123 VersaTools
®
rack shelf kit (part #60-190-20)
(figure 1)
• RSB 123 VersaTools rack shelf (part #60-604-20)
• RSU 126 6" deep universal rack shelf kit (part #60-190-10)
• RSB 126 6" deep basic rack shelf (part #60-604-10)
• RSU 129 1U universal rack shelf kit (part #60-190-01)
(figure 2)
• RSB 129 1U basic rack shelf (part #60-604-01)
On the standard rack shelf, the MDA mounts in one of four
locations to the rear of the rack or in one of four locations to the
front of the rack.
1. If feet were previously installed on the bottom of the
MDA, remove them.
2. Mount the MDA on the rack shelf, using two 4-40 x 3/16"
screws in opposite (diagonal) corners to secure the MDA
to the shelf.
3. Install blank panel(s) or other unit(s) to the rack shelf.
Only products in the VersaTools line can be mounted to a
VersaTools shelf. Any 1U rack-mountable Extron
product can be mounted on the standard shelf.
32
