Extron’s P/2 DA2 MT is a mountable, one input, two buffered out-
put, high resolution VGA/SXGA distribution amplifier with audio.
This DA drives a high resolution computer-video signal up to 250
feet through high-quality cable, such as Extron’s VGA cable. For con-
venient access, the P/2 DA2 MT may be mounted under a desk or
through a desk (through-desk mounting brackets are optional).
■ Bandwidth – 300 MHz (-3dB) RGB video bandwidth.
■ Compatibility – Compatible with all modes/resolutions of
VGA, SVGA, XGA, and SXGA graphic cards, monitors, and
projectors. Compatible with Mac sources and Mac-compatible
displays with optional Mac/VGA adapter.
■ Input connector – Features a 15-pin HD female connector for
video input.
■ Output connectors – Features 15-pin HD female connectors
for buffered video output and buffered local monitor output.
■ Audio connectors – Features a 3.5 mm female audio jack for
audio input and a 3.5 mm captive screw connector for bal-
anced or unbalanced audio output.
■ Audio interfacing – Unbalanced audio may be converted to
balanced audio. Balanced audio eliminates noise usually associ-
ated with unbalanced audio when distributed over long cable
runs.
■ ID bits – ID bits are normally routed to local monitor output.
ID bit termination is dip switch selectable.
■ Level and peaking (display output only) – Level control
adjusts brightness level of image. Peaking control adjusts
sharpness level of image.
■ Mountable – Includes detachable brackets for under-desk
mounting. Optional brackets available for through-desk
mounting.
■ Power supply – Includes an external 9VDC desktop power
supply (detachable).
■ Part number: 60-295-01
P/2 DA2 LC
P/2 DA2 MT
FEATURES
APPLICATION DIAGRAM
PC Computer
P/2 DA2 LC
Projector
Up to 100' w/ Extron
VGA Extension Cable
FEATURES
P/2 DA2 LC P/2 DA2 MT
Extron’s P/2 DA2 LC is a one input, two output, medium resolu-
tion VGA/XGA distribution amplifier. This cost-effective DA
drives a computer-video signal up to 100 feet through high-quality
cable, such as Extron’s VGA cable.
■ Bandwidth – 150 MHz (-3dB) RGB video bandwidth.
■ Compatibility – Compatible with all modes/resolutions of VGA
and XGA graphic cards, monitors, and projectors.
■ Input connector – Attached 1' 15-pin HD male cable is includ-
ed for reliable connection of video signals.
■ Output connectors – Features 15-pin HD female connectors for
buffered video output and non-buffered local monitor output.
■ ID bits – ID bits are routed to local monitor output.
■ Power supply – A 110VAC, wall-mount power supply is
attached to the USA/domestic version of the P/2 DA2 LC,
and a 110-220VAC, desktop power supply is attached to the
world version of the P/2 DA2 LC.
■ Part numbers
60-160-01 (USA/domestic)
60-160-02 (World)
