Specifications are subject to change without notice.
sPeCIFICatIONs
Optical specificatiOns
NOTE: These amplifiers are class 1 laser products. They meet the safety
regulations of IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.
Number/type
Input .............................................. 1 singlemode or multimode fiber optic
Output ........................................... 8 singlemode or multimode fiber optic
Connectors ................................... 8 LC connectors
Operating distance ....................... 30 km (18.75 miles) with singlemode (SM)
cables
0.15 km (492') with multimode (MM)
cables
NOTE: Operating distance is approximate. These are typical distances. The
maximum distance may be greater than these typical numbers depending on
factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or
chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength ........... 850 nm for MM model,
1310 nm for SM model
Data rate ....................................... 4.25 Gbps
Transmission power
Singlemode .................................... -5 dBm, typical
Multimode ..................................... -5 dBm, typical
Maximum receiver sensitivity
Singlemode .................................... -18 dBm, typical
Multimode ..................................... -12 dBm, typical
Optical loss budget
Singlemode .................................... 13 dB, maximum
Multimode ..................................... 7 dB, maximum
cOntrOl/remOte
Serial control ports ....................... 1 RS-232, 3.5 mm captive screw connector,
3 pole (rear panel)
1 RS-232, 2.5 mm mini stereo jack (front
panel)
Baud rate and protocol ................ 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations . Captive screw connector: 1 = TX, 2 = RX,
3 = GND
Mini stereo jack: tip = TX, ring = RX,
sleeve = GND
Program control ........................... Extron's control/configuration program for
Windows
®
Extron's Simple Instruction Set (SIS
™
)
General
Power ............................................ 100 VAC to 240 VAC, 50-60 Hz, 20 watts,
internal
Temperature/humidity ................. Storage: -40 to +158 ˚F (-40 to +70 ˚C) /
10% to 90%, noncondensing
Operating: +32 to +122 ˚F (0 to +50 ˚C) /
10% to 90%, noncondensing
Cooling ......................................... Convection, vents on top and sides
Mounting
Rack mount .................................... Yes, with optional 1U, 9.5" deep rack
shelf (RSU 129, #60-190-01; RSB 129,
60-604-01)
Furniture mount ............................. Yes, with optional MBU 125 Under-desk
Mounting Kit (#70-077-01) and MBD 129
Through-desk Mounting Kit (70-077-02)
Enclosure type .............................. Metal
Enclosure dimensions ................... 1.7" H x 8.7" W x 9.5" D
(1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
(Depth excludes connectors.)
Product weight ............................. 2.3 lbs (1 kg)
Shipping weight ........................... 4 lbs (2 kg)
Vibration ....................................... ISTA 1A in carton (International Safe Transit
Association)
Regulatory compliance
Safety ............................................. CE, CUL, UL
EMI/EMC ....................................... CE, C-tick, FCC Class A, FDA Class 1, ICES,
VCCI,
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
NOTE: All nominal levels are at ±10%.
NOTE: Specifications are subject to change without notice.
Model Version Description Part number
FOX 4G DA8 MM
Multimode .........................................................60-927-01
FOX 4G DA8 SM
Singlemode ........................................................60-927-02
