Operation, cont’d
CrossPoint 300 Matrix Switchers • Operation3-10
1 2 3 4 5
OUTPUTS
6
7 8
ENTER PRESET
Press and release the Output 3, Output 4,
and Output 8 buttons.
The LEDs blink to indicate that the selected
RGBHV and audio input will be tied to
these outputs.
The Enter LED blinks to indicat
the need to confirm the change
Figure 3-7 — Select the outputs
5. Press and release the Enter button (figure 3-8).
NTER
The Enter LED and all input LEDs an
output LEDs return to the unlit state.
Press the Enter button to confirm
the configuration change.
Figure 3-8 — Press the Enter button
The current configuration (figure 3-9) is now:
• Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
Output
3
4
8
5
Vide
Aud
Figure 3-9 — Example 1, final configuration
Example 2: Adding a tie to a set of video and audio ties
The following steps show an example in which a new video tie is added to the
current configuration. The steps show the front panel indications that result from
your actions.
