382400-EN-V1.2-3/12
8
Maintenance
WARNING: To avoid electrical shock, disconnect the meter from any circuit, remove the test leads
from the input terminals, and turn OFF the meter before opening the case. Do not operate the meter
with an open case.
Inspection
Inspect the clamp for damage before each use; have the unit repaired before use if damage is
evident.
Cleaning and Storage
Periodically wipe the meter and probe with a damp cloth and mild detergent; do no use abrasives or
solvents. If the meter is not to be used for 60 days or more, remove the batteries and store
separately.
Battery Replacement
When the low battery symbol appears on the LCD, replace the two 1.5V ‘AA’
batteries.
1. Remove the center Phillips head screw that secures the rear battery door
(see diagram)
2. Open the battery compartment
3. Replace the 1.5V ‘AA’ batteries
4. Secure the battery compartment
You, as the end user, are legally bound (EU Battery ordinance) to return all used
batteries, disposal in the household garbage is prohibited! You can hand over your
used batteries / accumulators at collection points in your community or wherever batteries
/ accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
