A SERVICE OF

logo

EPSON AcuLaser C1100 Revision B
TROUBLESHOOTING FIP according to the printer message 241
FIP-C4
Panel Message
Possible parts that caused the error
PWBA ESS
Troubleshooting
FIP-C5
Panel Message
Service Req C2000
Possible parts that caused the error
PWBA ESS
Troubleshooting
Service Req C1200 Service Req C1210
Step Check Yes No
1
Check of EEPROM
Initialize the EEPROM. Refer to “EEPROM
initialization” (p.55)
Does the error occur?
To Step [2] End of
procedure
2
External noise
1. Check the surrounding of the printer for
electrical equipment.
2. Disconnect all cables connected to the
printer, except the AC cable, and make
operation check.
Does the error occur?
Replace the
PWBA ESS.
(p.409)
End of
procedure
Step Check Yes No
1
Check of host PC
Restart the host PC.
Does the error occur?
To Step [2] End of
procedure
2
Check of Printer Driver
Reinstall the Printer Driver.
Does the error occur?
To Step [3] End of
procedure
3
External noise
1. Check the surrounding of the printer for
electrical equipment.
2. Disconnect all cables connected to the
printer, except the AC cable, and make
operation check.
Does the error occur?
Replace the
PWBA ESS.
(p.409)
End of
procedure