Scanning a Photo to a Memory Card 97
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the LCD screen to format the card. Any data stored on the
card will be erased.
4. Open the scanner lid.
5. Place your photo face down on the glass in the upper left corner about 0.1
inch from the edges, as shown.
Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be copied.
6 Close the scanner lid.
7. Press the
Scan button.
8. Use the u and d buttons to choose
Scan to Memory Card, then press the
OK button.
9. Use the u, d, l, and r buttons to select the following options:
■ Scan area: Auto cropping (if the edges of the photo are light in color,
select
Max area)
■ Document type: Text or Graphics
■ Resolution: Normal, Fine, or Photo
0.1 in
0.1 in
Move the photo in
about 0.1 inch
from the edges
SP RX600 Users Guide.book Page 97 Thursday, January 29, 2004 1:08 PM
