Fine-tuning the Projector 67
4. After highlighting the option you want to adjust, use the
pointer button to change the setting. In some cases, you may
have to press the
Enter button to see a sub-screen for changing
the setting.
■ Press the left or right side of the pointer button to adjust
a slider bar.
■ To select from two or more settings, use the pointer
button to highlight the desired setting, then press
Enter.
5. After changing the settings, press the
ESC button to save your
changes and return to the previous menu (or press it repeatedly to
exit the menu system).
You can also press the
Menu button to exit.
Restoring the Default Settings
You can use the menu system’s Reset options to restore the factory-
default settings for:
■ all the settings listed in a specific menu
■ all the settings in all menus
To restore the settings in a specific menu, enter the menu whose
settings you want to change, select
Reset, and confirm as needed. (The
example below shows how to reset the Video menu.)
To restore all the projector settings to their factory-default values,
select
Reset All.
+
-
ON
OFF
Video
Audio
Color Mode
Position
Tracking
Sync.
Brightness
Contrast
Sharpness
Select
0000
0
0
0
+
-
+
-
Adjust
[Presentation ]
Resolution
Reset
Execute
[ ]: Enter
[ ]: Select
[Menu]: Exit
Reset All
About
Advanced2
Advanced1
User's Logo
Setting
Effect
Preset
Auto
Manual
Auto
Manual
Set
Adjust
Select
Reset
Reset All
note
Reset All does not reset the
Computer Input, BNC
Input, User’s Logo,
Language, Projector ID,
Network, and Lamp
settings.
