5-22
SelecType
* This appear only when the corresponding option is installed.
Parallel menu
Speed
Specifies the transfer speed by selecting the delay period from the
STROBE to the ACKNLG signal. For more information on the
parallel interface signal, see “Interface,” in Appendix A.
Bi-D
Enables or disables bidirectional communication.
Buffer Size
Determines the amount of memory to be used for receiving data
and printing data. If set to
Maximum
, more memory is allocated
for receiving data. If set to
Minimum
, more memory is allocated
for printing data. The factory default setting is
Normal
.
Serial menu
Word Length
You can select an 8-bit or 7-bit word length. See your computer
manual and software documentation for the proper setting. The
factory setting is
8-bit
.
Baud Rate
Use this option to set the data transfer rate (baud) for the serial
interface. The baud rate is measured in bits per second (bps). See
your computer manual and software documentation for the
proper setting.
SelecType Init –
Item Values
