A SERVICE OF

logo

Write Error Card
The card is not able to write or the card is not installed.
Otherwise, writing to the card was not finished correctly.
To correct this error, (1) turn off the printer and remove the
card, then turn on the printer, (2) remove the card while the
printer is on, then press the
Continue
button, or (3) reset the
printer by pressing the
ALT
and
Reset
button at the same time.
Writing Card
The printer is writing data in the PCMCIA card.
Warming Up
The printer is warming up.
R
Albatross Rev.c
A5 size Chapter 6
96/08/23 Pass 0, DR
Troubleshooting and Maintenance
6-27