SelecType Options
When you select the memory sharing proportion, save the setting
with P-CONFIG SAVE option and turn the printer off. Wait at
least 5 seconds and turn it back on. Then the setting becomes
effective.
5 to 95 (in steps of 5)
This option sets the time for a channel timeout. If the printer is on
line and no new data is sent for the number of seconds specified,
and there is data in the other channel, the printer automatically
switches the current channel to the other. The factory setting is 10.
ON
OFF
When automatic continue is set to ON, the printer automatically
continues to print after a certain period of time when one of the
following errors occurs: SET FULL PRINT, PAGE BUFFER FULL,
PAPER SIZE ERROR, TRAY SET XXX, and INSUFF. MEMORY.
When this option is off, you must press the CONTINUE button to
resume printing. In most cases, leave this option set to OFF.
ON
OFF
When this option is on, a buzzer sounds when a printer error
occurs. When the option is off, the buzzer does not sound.
SelecType
3-33
