8
Part Names and Functions
Rear
•
••
•
Remote control light-receiving
area p.11
Receives signals from the remote control.
•
••
•
Power inlet p.26
Connects the power cable.
•
••
•
Computer/Component Video port
p.16, p.23
Inputs analogue video signals from a
computer and component video
signals
from other video sources.
•
••
•
Video port p.22
Inputs composite video signals to the
projector from other video sources.
Connect using an A/V cable.
•
••
•
S-Video port p.22
Inputs S-Video signals to the projector from
other video sources.
•
••
•
USB port p.19, p.89
Connects the projector to a computer via the
USB cable.
•
••
•
Security lock ( ) p.86
•
••
•
Monitor Out port p.21
Outputs the projected analogue video signal
from a computer to an external monitor. This
feature is not available for video equipment
signals.
•
••
•
Control (RS-232C) port p.89
Connects the projector to a computer using an
RS-232C cable. This port is for control use
and should not be used by the customer.
•
••
•
Audio 2 port p.24
Inputs audio signals from a video source.
Connect using an A/V cable.
•
••
•
Audio 1 port p.18, p.24
Inputs audio signals from a computer or
component video equipment. Connect using
a stereo mini jack.
