3. Click the Details button, then click Job Default. You see
the Document Properties dialog box, which includes the
Form and Orientation settings described below.
If you want to access the form source settings, click the
Set Up button instead of the Details button. You see the
Printer Setup dialog box, which includes the Forms Source
and Forms Name settings described below.
4. Click Options to open the Advanced Document Properties
dialog box, which contains the Graphics Resolution, Color,
and Optimization settings.
Changing the printer driver settings
Before printing, check that the printer driver settings are
appropriate for the kind of document you want to print, and
change the settings as needed. When you are finished making
changes, click OK to apply the settings, or click Cancel to
cancel your settings.
Printer Setup dialog box
T Forms Select the paper source that best meets your
Source needs. There are three cutting method options
for both the front and rear tractors in the
Paper source list if the optional perforation
cutter is installed. For details, see “Using the
Perforation Cutter” in Chapter 6.
T Forms Select the kind of form loaded in the printer.
Name If you don’t see your form, select it from the
Name list. You can select a different kind of
form for each source. Select the source first
and then choose the kind of form you want
from the Name list.
2
R
Peony Rev.C
A5 size Chapter 2
98/01/07 Pass 4
Setting Up Your Software 2-19
