3. If there are multiple AppleTalk zones at your site, select the
zone where the printer is located.
4. Under New Name, enter a name for your printer. You should
assign a name that clearly distinguishes your printer from
others on the network.
5. Click
Rename
and then click
Done
to quit the EPSON
Namer.
Using the Chooser to select your printer
After you install the printer software, you need to open the
Chooser to select your printer. You have to choose the printer
the first time you use it or whenever you want to switch to
another printer. Your Macintosh will always print using the
last printer selected.
If you are using the serial interface, choose your printer driver
as described in the following section, “Using the serial interface
connection.” If your system is connected to an AppleTalk
network, see “Using the AppleTalk connection” on page 2-35.
Note:
If you are using a Macintosh Quadra 950 or 900, you need to choose
Compatible
in the Serial Switch dialog box before selecting your
printer from the Chooser. To open the Serial Switch dialog box, choose
Control Panel
from the Apple menu, then choose
Serial Switch
.
L
Easter10 Ref. Guide
Rev.C
A5 size Chapter 2
1-07-98 DR, pass 3
2-32
Getting Started
