A SERVICE OF

logo

Open as PDF
next previous
Using Continuous Paper
Setting the top of form position
You may need to set the top of the form to a certain position for
printing on ready-made forms.
To set the top-of-form position at the third line of the paper, for
example, mark the paper 4.1 inches (105 mm) above the
perforation. Then load the paper and align this mark with the mark
on the tractor unit, as shown below. The third line (0.42 inches or
10.6 mm) below the perforation becomes the top-of-form position.
You may have to experiment with setting the top of form position
several times to get this adjustment just right.
Paper Handling
2-11