
18
Installing the driver (Windows)
8
From the Windows
start
menu, choose
“Run...”
The
“Run”
dialog box will appear.
9
Input the name into the dialog box as shown, and click
[OK]
.
fig.win-run
(Drive name): \Driver\XP_ENG\setup.exe
* The drive name is “D:” in the example shown here, but this may be different on your system.
Specify the drive name for your CD-ROM drive.
10
The
EDIROL FA-101 Driver Setup
dialog box appears.
Click
[Install]
.
11
A dialog box entitled
“Setup is now ready to install the drivers”
appears.
Use a FireWire (IEEE 1394) cable to connect the FA-101 to your computer.
1.
With the power switch turned off, connect the AC adaptor to the FA-101.
2.
Plug the AC adaptor’s power cord into an AC outlet.
3.
Use a FireWire (IEEE 1394) cable to connect the FA-101 to your computer.
12
Turn on the power switch
of the FA-101.
The
“Found New Hardware”
message appears near the taskbar. Please wait.
13
A dialog box entitled
Welcome to the Found New Hardware Wizard
appears. Make
sure that the box indicates
“EDIROL FA-101 Sub 1,”
choose
“Install the software
automatically (Recommended),”
and click
[Next]
.
Checking the name of
your drive.
From the start menu,
choose My Computer. In
the window that appears,
verify the name of the CD-
ROM drive into which you
inserted the CD-ROM in
step 7.
The (D:) or (E:) displayed
y the CD-ROM drive icon
is the drive name.
If you want to install the
driver into a different hard
disk, click [Browse] and
specify the desired
location.
fig.caution.eps
If the setting in the Driver Signing
Options dialog box is not set to
“Ignore,” a dialog box like the
following will appear.
Click [Continue Anyway] to continue
driver installation.
Once the connections have
een completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
efore the unit will operate
normally.
FA-101_e.book 18 ページ 2005年11月24日 木曜日 午後1時25分