Single Ethernet Port with 11g Wireless and Firewall
Technical Specifications (RTA1030W)
Regulatory Approval and Compliance
•ACA
• Telecom New Zealand PTC270
Power Requirement and Operation
Environment Requirement
• Power Adaptor: Output 12 VAC, 1A
• Power Consumption: less than 10 W
• Ambient Temperature: 0 to 40°C
• Relative Humidity: 20% to 90% (non-condensing)
Physical
• Front Panel: 6 LED Indicators
• Back Panel
Hardware Interface
• One RJ-11 port for ADSL connection
• IEEE 802.11g and 802.11b Wireless LAN interface
• Single Ethernet port for IEEE 802.3/802.3u 10/100
Base-T auto-sensing, auto cross-over
• One USB port compliant to USB v1.1
• One hidden reset button for restoring factory
default settings
Chipset
• Broadcom BCM6348 single-chip ADSL2+ with
integrated MIPS32 CPU, transceiver & Analog
Front End
• Broadcom BCM4318 single-chip 802.11g wireless
LAN solution
Wireless LAN
• Supports IEEE 802.11g and 802.11b
• Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for
802.11g and 11, 5.5, 2, 1 Mbps for 802.11b
• Diversity antenna system: one external antenna
and one internal antenna
• Maximum RF output power: 18dBm for 802.11g
• Coverage Area:
802.11g: LOS (Outdoors): Max. 50 meters;
Indoors: Max. 20 meters
802.11b: LOS (Outdoors): Max. 180 meters;
Indoors: Max. 60 meters
• Support WEP (Wired Equivalent Privacy) RC4 with
64-bit or 128-bit key length
• Support Access Control List, only registered WLAN
clients are allowed
• Support 802.1x, WPA-PSK, WPA, WPA2 & Mixed
WAP/WPA2.
www.dynalink.co.nz www.dynalink.com.au
