E
19
Beam vertical adjustment (fig. 11)
This function allows headlight beam height setting.
To enter this function, hold down button (B, see page 11)
and turn the key to ON; the display shows a value (fig. 11a)
corresponding to beam position and the pilot light on the
display (12, fig. 5) comes on.
Use buttons (A) and (B), respectively, to lower or raise the
beam. Range available is from position "3" (max. beam
height) to position "-3" (min. beam height).
Turn the key to OFF to exit the function. While exiting
setting mode, the selected beam position is stored.
fig. 11
BBBA
AAAA
AB B B
fig. 11a
DUCum_1000DS####03_###e.book Page 19 Wednesday, March 12, 2003 4:33 PM
