xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
login
Purpose Used to log in a user to the Switch’s console.
Syntax
login
Description This command is used to initiate the login procedure. The user
will be prompted for his Username and Password.
Parameters None.
Restrictions None.
Example usage:
To initiate the login procedure:
DES-6500:4#login
Command: login
UserName:
logout
Purpose Used to log out a user from the Switch’s console.
Syntax
logout
Description This command terminates the current user’s session on the
Switch’s console.
Parameters None.
Restrictions None.
Example usage:
To terminate the current user’s console session:
DES-6500:4#logout
config command_prompt
Purpose Used to configure the command prompt for the Command Line
Interface.
Syntax
config command_prompt [<string 16> | username | default]
Description This command is used to configure the command prompt for the
CLI interface of the Switch. The current command prompt
consists of “product name + : + user level + product name” (ex.
DES-6500:4#). The user may replace all parts of the command
prompt, except the # by entering a string of 16 alphanumerical
characters with no spaces, or the user may enter the current
login username configured on the Switch.
Parameters <string 16> - Enter an alphanumeric string of no more than 16
characters to define the command prompt for the CLI interface.
username – Entering this parameter will replace the current CLI
command prompt with the login username configured on the
22
