D-Link DHS-3224V Switch User’s Guide
64
• Accounting Mode:<Start and Stop> – Select the desired method: Start and Stop, Stop only, or None.
*
The ServerTimeout value must be set to a value that is less than the Radius Timeout and Radius Maximum
Retransmit settings (see Configure 802.1X – Authenticator Configuration)
Figure 6- 29. Configure Authentic Radius Server screen
This screen allows you to set the following features:
• Succession: <First> – Choose the desired RADIUS server to configure: First, Second or Third.
• Radius Server: [0.0.0.0] – Set the RADIUS server IP.
• Authentic Port:[ 0 ] – Set the RADIUS account server(s) UDP port. The default is 1812.
• Accounting Port:[ ] – Set the RADIUS account server(s) UDP port. The default is 1813.
• Key – Set the key the same as that of the RADIUS server.
• Confirm Key – Confirm the shared key is the same as that of the RADIUS server.
• Status:<Invalid> –This allows you to set the RADIUS server as Valid or Invalid.
Figure 6- 30. Configure Local Users screen
The fields on this screen allow you to add or remove local users.
