D-Link Systems DGS-3600 Manual

A SERVICE OF

next previous

xStack

®

DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch

Figure 6- 9. Access Rule Table window

Click Add Rule to add a new Rule for an existing profile. The Access Rule Configuration window will appear.

To remove a previously created rule, select it and click the

button. To add a new Access Rule, click the Add Rule button, and

the Access Rule Configuration window will appear:

Figure 6- 10. Access Rule Configuration window (Ethernet)

To set the Access Rule for Ethernet, adjust the following parameters and click Apply.

Parameters Description

Profile ID

This is the identifier number for this profile set.

Mode

Select Permit to specify that the packets that match the access profile are forwarded by the

Switch, according to any additional rule added (see below).

313