24-port NWay Ethernet Switch User’s Guide
Web-Based Network Management 115
Figure 7-17. Add/Delete IGMP Entry window
To Add/Modify to the table or Delete from the table, check the desired option button, enter a value from 1 to 4094
in the VLAN ID field, enter a value between 30 and 9999 in the Age-out Timer field, enable or disable the IGMP
Status control, and then click Apply.
The information above is described as follows:
♦ Add/Modify to the table Allows you to create or edit an entry for the table.
♦ Delete from the table Allows you to delete an IGMP entry from the table.
♦ VLAN ID This is the VLAN that will be defined on this screen. Note a VLAN ID is from 1 to 4094.
♦ Age-out Timer Specifies the time in seconds the switch will wait before trying to host IGMP on the VLAN.
♦ IGMP Status Enables/disables IGMP on this VLAN. Up to 12 VLANs can be enabled to handle IGMP
packets at any one time.
VLANs & MAC-based Broadcast Domains
This section allows you to create Port-based VLANs, IEEE 802.1Q VLANs, and MAC-based Broadcast Domains. If unsure
about this material, please consult Chapter 5, “Switch Management Concepts.”
