7
© 1997 Directed Electronics, Inc.
Once a switch has been selected, you may choose the number of pulses that
must be applied to the wire to disarm the system, from 1-5. After programming
is complete, the Ghost Switch will become a disarm switch for both the security
system and optional VRS.
NOTE: The Valet
®
switch and VRS button still retain their disarm capability unless the system is programmed to
Ghost Switch Only disarm mode. See Programming Options for more details.
To use the Ghost Switch
™
to disarm the system without a transmitter:
Turn on the ignition. Operate the ghost switch the number of times you have
selected. After one second the system will disarm. If the Ghost Switch is
operated the incorrect number of times, you will have to turn the ignition off
and repeat the above procedure. If you have not selected the pulse count, the
default count is two pulses.
NOTE: Connection of the Ghost Switch may require extra labor. See the dealer for details.
Silent Mode
™
To temporarily turn off the arm or disarm chirps, use Silent Mode
™
. Simply
press Button II briefly before arming or disarming, and the confirmation
chirp(s) will be eliminated for that one operation only. If you want the
arm/disarm chirps turned off permanently, your dealer can do this for you.
NOTE: The Warn Away
®
response to lighter impacts is bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an area you want chirp-free. The system is still fully able
to trigger. Only the Warn Away response is defeated.
Panic Mode
If you are threatened in or near your vehicle, you can attract attention by trig-
gering the system with your transmitter! Just press Button I for 1.5 seconds,
and you will enter Panic Mode.The siren will sound and the parking lights will
flash for 30 seconds. To stop Panic Mode at any time, press Button I on the
transmitter again.
