English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY D
EWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
TRIGGER SWITCH
FENCE
VISE LEVER
CRANK
AUTO-
RETRACTING
GUARD
BLADE
VISE
CARRY
HANDLE
LOCK
DOWN PIN
BLADE LOCK LEVER
BASE
HEX
WRENCH
WARNING: FOR YOUR OWN SAFETY READ INSTRUCTION
MANUAL BEFORE OPERATING MULTI-CUTTER.
Important Safety Instructions
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire
and/or serious personal injury.
Polarized Plugs
To reduce the risk of electric shock, this equipment has a polarized
plug (one blade is wider than the other). This plug will fit in a polarized
outlet, only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the plug in any way. Units
rated for 220 volts will have a different style plug that will not fit the
outlet and is not polarized.
SAVE THESE INSTRUCTIONS
• KEEP GUARDS IN PLACE and in working order.
• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of
checking to see that keys and adjusting wrenches are removed from
tool before turning it on.
• KEEP WORK AREA CLEAN. Cluttered areas and benches invite
injuries.
• DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power
tools in damp or wet locations, or expose them to rain. Keep work
area well lighted.
• KEEP CHILDREN AWAY. All visitors should be kept at a safe distance
from work area.
• MAKE WORKSHOP KID PROOF with padlocks, master switches, or
by removing starter keys.
• DON’T FORCE TOOL. It will do the job better and safer at the rate for
which it was designed.
• USE RIGHT TOOL. Don’t force tool or attachment to do a job for which
it was not designed.
• USE PROPER EXTENSION CORD. Make sure your extension cord is
in good condition. When using and extension cord, be sure
1
AUXILIARY
VERTICAL
CLAMP
