Installing System Components 81
Power Supplies
Your system supports two 1100 W power supplies.
NOTE: The power supply label specifies the maximum power output.
If only one power supply is installed, it must be installed in the first power
supply bay.
CAUTION: To ensure proper system cooling, the power supply blank must be
installed in the second bay in a non-redundant configuration. See "Installing a
Power Supply Blank" on page 83.
1 system cover 2 cooling shroud
3 PCIe expansion card slots (6) 4 cooling fan modules (4)
5 heat sink blank (single-processor
configuration)
6 memory modules (up to 18 total, 9 for
each processor)
7 system feet (4) 8 heat sink and processor (1 or 2)
9 SAS or SATA hard drives (up to 8
[3.5"] and 16 [2.5"])
10 control panel
11 tape drive (optional) 12 optical drive
13 internal SD module (optional) 14 SAS backplane
15 RAID battery (optional) 16 chassis intrusion switch
17 integrated storage controller card
book.book Page 81 Monday, June 15, 2009 11:33 AM
