A SERVICE OF

logo

h) palmrest
i) base cover
j) battery
k) ExpressCard
l) SD card
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Connector Port
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) SD card
b) ExpressCard
c) battery
d) base cover
e) palmrest
f) keyboard
g) bluetooth module
h) heat-sink fan
i) heat-sink module
j) speakers
k) base chassis
3. Disconnect the power-connector cable from the system board.
4. Remove the power connector port.
39