A SERVICE OF

logo

Installing the I/O Board
1. Place the I/O board on the computer.
2. Tighten the screw to secure the I/O board to the computer.
3. Install:
a. Base frame
b. Keyboard
c. System Fan
d. WLAN Card
e. Hard Drive
f. Battery
g. Base Cover
4. Follow the procedures in After Working Inside Your computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. Base Cover
b. Battery
c. Hard Drive
d. WLAN Card
e. System Fan
f. Keyboard
g. Base frame
3. Perform the following steps as shown in the illustration:
a. Disconnect the coin-cell cable from the computer [1].
b. Lift the coin-cell battery from the computer [2].
25