A SERVICE OF

logo

Open as PDF
next previous
6. Remove the screws that secure the optical-drive bracket. Remove the optical-drive bracket from the optical drive.
Installing the Optical Drive
1. Replace the optical-drive bracket and tighten the screws that secure the optical drive to the optical-drive bracket.
2. Slide the optical drive into the compartment on the chassis.
3. Tighten the screw to secure the optical drive to the computer.
4. Install the:
a) base cover
b) battery
5. Follow the procedures in
After Working Inside Your Computer.
Removing the Hard Drive
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) battery
b) base cover
3. Remove the screws that secure the hard drive to the computer.
14