Dell 1564 Manual

next previous

Back to Contents Page

 USB/Audio Board

Dell™Inspiron™1564ServiceManual

Removing the USB/Audio Board

Replacing the USB/Audio Board



Removing the USB/Audio Board



1. Follow the procedures in Before You Begin.



2. Remove the battery (see Removing the Battery).



3. Remove the optical drive (see Removing the Optical Drive).



4. Remove the module cover (see Removing the Module Cover).



5. Remove the power button panel (see Removing the Power Button Panel).



6. Remove the keyboard (see Removing the Keyboard).



7. Remove the palm rest (see Removing the Palm Rest).



8. Lift the connector latch and slide the USB/audio cable out of the connector on the USB/audio board.



9. Remove the screw that secures the USB/audio board to the computer base.



10. Lift the USB/audio board and ease the USB and audio connectors out of the computer base.

Replacing the USB/Audio Board

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface.

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the

computer.

USB/audio cable

connector latch

connector on USB/audio board

USB/audio board

screw

